Adjust Settings

PC8663-UN-29APR15

Menu Button

PC22295-UN-21MAR16

John Deere Rate Controller 2000 Button

PC22296-UN-21MAR16

Setup Softkey

PC22341-UN-06APR16

A - Settings Tab

Settings tab (A) allows operator to change most settings after creating a profile with the setup wizard.

1. Select Menu button.

2. Select John Deere Rate Controller 2000 button.

3. Select Setup softkey.

4. Select Settings tab.

Control Valve Setup Button

PC22436-UN-06APR16

Control Valve Setup Button

• Valve Response Rate
• Control Deadband
• Valve Delay
• Valve Advance
• Control Effort
• PWM Setup

  (Reference Adjust Control Valve for more information.)

  • Coil Frequency
  • High Limit
  • Low Limit
  • PWM Standby
• Boost Pump Setup
  • Coil Frequency
  • High Limit
  • Low Limit
  • Valve Response Rate

Flow / Rate Sensor Setup Button

PC22437-UN-06APR16

Flow / Rate Sensor Setup Button

• Flowmeter Calibration
• Flowmeter Pulse / Units
• Tank Fill Flowmeter Calibration
• Tank Fill Flowmeter Pulse / Units
• Catch Test Calibration

  (Reference Calibrate Flowmeter — Catch Test for more information.)

• Applied Product Calibration

  (Reference Calibrate Flowmeter — Applied Product for more information.)

Tank / Bin Setup Button

PC22438-UN-06APR16

Tank / Bin Setup Button

• Tank Capacity
• Current Level
• Low Tank Level
• Low Tank Level Alarm

Display Settings Button

PC22439-UN-06APR16

Display Settings Button

NOTE: The four data fields selected display on the top half of the main run page. Softkey region may be configured to display the first three selected data fields.

• Data Fields Displayed
  • Actual Rate Per Area
  • Target Rate Per Area
  • Area Per Hour
  • Area Remaining on Current Tank Level
  • Traveling Speed
  • Pressure Sensor
  • Volume Remaining
  • Volume Per Time (Flow Rate)
  • Area
  • Volume Applied

Pressure Sensor Setup Button

PC22440-UN-06APR16

Pressure Sensor Setup Button

• Pressure Sensor 1—6
• Calibrate Pressure Sensor
• Pressure Alignment Setup

(Reference Calibrate Pressure Sensor for more information.)

Auxiliary Features Setup Button

PC22441-UN-06APR16

Auxiliary Features Setup Button

• RPM 1 Calibration Pulse / Rev
• RPM 1 Low Limit
• RPM 1 Low Limit Alarm
• RPM 1 High Limit
• RPM 1 Low Limit Alarm
• RPM Sensor Assignment
• Enable Agitator
• Agitator Duty Cycle

Tiered Boom Setup Button

PC22442-UN-06APR16

Tiered Boom Setup

• Tier 1 Max Flow Rate
  • On a 2-tier system, both tiers enable once Tier 1 Max Flow Rate is achieved.
  • On a 3-tier system, the first tier disables and the second tier enables once Tier 1 Max Flow Rate is achieved.
• Tier 2 Max Flow Rate
  • On a 2-tier system, Tier 2 Max Flow Rate should be set to zero.
  • On a 3-tier system, both tiers enable once Tier 2 Max Flow Rate is achieved.
• Percent Tier Disable
  • Percent Tier Disable is the percentage of volume per minute setting that causes system to disable higher tier.