Implement Receiver Fore/Aft Offset

If implement receiver cannot be mounted directly over ground engagement point of implement, enter a fore/aft offset to account for receiver location. Example of ground engagement point would be the seed openers on a planter.

NOTE: Implement global positioning system (GPS) offset is critical to performance of system.

PC14926-UN-27APR12

Application Controller 1100 Button

PC13072-UN-16NOV10

Application Controller Main Softkey

PC17968-UN-07NOV13

Implement Steer Setup Button

PC17980-UN-07NOV13

Implement Shifter Setup Button

PC17969-UN-07NOV13

Implement GPS Offset Button

PC21341-UN-09JUL15

GPS Offset Drop-down Menu

PC21342-UN-09JUL15

Fore/Aft Shift Entry Box

1. Select Application Controller 1100 button.

2. Select Application Controller Main softkey.

3. Select Implement Steer Setup or Implement Shifter Setup button.

4. Select Implement GPS Offset button.

5. Select GPS Offset Forward or Backward from drop-down menu. If implement receiver is mounted over or in front of ground engagement point, select GPS Offset Forward. Select GPS Offset Backward if implement receiver is mounted behind ground engagement point.

6. Enter distance from center of receiver to ground engagement point in Fore/Aft Shift entry box. Measure along centerline of implement. Enter 0.0 if implement receiver is centered.