Monitor and Control System

Because the monitor and control systems are an integral part of the machine, operations involving displays and electronic controllers are shown throughout the manual, in their respective sections.

Monitor portion of the system: takes signals from the wheel angle sensors along with relevant implement GPS information and displays the activity on the cab-mounted console. The active display informs the operator of machine activities before they can be seen from the operator seat.

Control portion of the system: used to steer implement along the desired guidance line. Control system continually adjusts the implement steering cylinder to maintain zero off-track error. A continuous system adjustment compensates for external disturbances to the system that would normally cause implement to track off the desired path.