Preseason Checklist

In addition to performing checklist before season begins, utilize preseason checklist if any of the following occur:

• A different tractor or implement is introduced to system.
• A hydraulic system component is repaired, replaced, or adjusted.
• An Ag Management Solutions (AMS) component is replaced.

Preseason Checklist

□  Obtain the latest Operator's Manual.

(Reference John Deere Technical Information Bookstore for more information.)

□  Update Software. Go to StellarSupport.com for latest software.

□  Display

□  Machine receiver

□  Implement receiver(s)

□  Base station receiver

□  Controller

□  Activate applications on display.

□  Inspect wiring harness for wear and damage around pinch points, corners, edges, and harness support locations. Repair as necessary.

□  Inspect wiring harness at connectors for wear on exposed wires. Repair as necessary.

□  Inspect connector seals and latching mechanisms. Repair as necessary.

□  Inspect connector pins for wear, debris, and corrosion. Clean and (or) repair as necessary.

□  ISO connector

□  Receivers

□  Display

□  Inspect mounting hardware. Retorque as necessary.

□  Display

□  Receivers

□  Mast

□  Adjust selective control valve (SCV) flow rates.

□  Adjust counterbalance valve (if applicable).

□  Calibrate SCV thresholds.

□  Calibrate machine and implement terrain compensation modules (TCMs).

□  Inspect implement hydraulic cylinder for leaks.

(Reference implement Operator's Manual for detailed checklists.)