System Status

1. 
   PC8663-UN-29APR15

   Menu Button

   Select the Menu button.

---




2. 
   PC14926-UN-27APR12

   Application Controller 1100 Button

   Select the Application Controller 1100 button.

---




3. 
   PC13072-UN-16NOV10

   Application Controller Main Softkey

   Select the Application Controller Main softkey.

---




4. 
   PC18007-UN-07NOV13

   Implement Steer Main Button

   Select the Implement Steer Main button.

---




5. 
   PC13527-UN-03MAY11

   Status Code Location

   A - Status Code

   Verify Status Code (A).

---

Status Code	Description	Solution
Not Activated	Desired application has not been activated on the control unit.	Obtain an activation code for application.
No GPS	No global position system (GPS) correction available.	Ensure that StarFire™ Receivers on implement and machine are connected and functioning properly.
Cycle Power	Controller must be restarted to communicate with new function.	Shut OFF machine, wait for display to power down, then restart machine.
No RTK	No real time kinematic (RTK) correction seen on selected receiver, or RTK not currently available.	Activate RTK on the implement receiver and (or) machine receiver.
Update GPS SW	Incompatible software loaded.	Update software on StarFire™ Receivers to newest version.
Machine SCV is Not in Auto	Selective control valve (SCV) control not detented to engage Active Implement Guidance.	Detent SCV to engage Active Implement Guidance. For an external valve, detent added SCV lever.
OK	Active Implement Guidance is ready to operate, or is operating without errors. Any faults are likely to be independent of the Active Implement Guidance control system.	System working properly.
Implement Up	Implement is raised or has faulty implement height switch.	Ensure requirement to engage is correct.