Implement Receiver Fore/Aft Offset

If implement receiver cannot be mounted directly over the ground engagement point of implement, enter a fore/aft offset to account for receiver location. Example of a ground engagement point would be the seed openers on a planter.

Implement global positioning system (GPS) offset is critical to performance of system. If needed, only use one offset (lateral or fore/aft). For best performance, mount implement receiver as close as possible to have zero offset.

1. 
   PC14926-UN-27APR12

   Application Controller 1100 Button

   Select the Application Controller 1100 button.

---




2. 
   PC13072-UN-16NOV10

   Application Controller Main Softkey

   Select the Application Controller Main softkey.

---




3. 
   PC17968-UN-07NOV13

   Implement Steer Setup Button

   
   PC17980-UN-07NOV13

   Implement Shifter Setup Button

   Select either the Implement Steer Setup button or Implement Shifter Setup button.

---




4. 
   PC17969-UN-07NOV13

   Implement GPS Offset Button

   Select the Implement GPS Offset button.

---




5. 
   PC21341-UN-09JUL15

   GPS Offset Drop-Down Menu

   Select GPS Offset Forward or Backward from the drop-down menu. If implement receiver is mounted over or in the front of the ground engagement point, select GPS Offset Forward. Select GPS Offset Backward if implement receiver is mounted behind the ground engagement point.

---




6. 
   PC21342-UN-09JUL15

   Fore/Aft Shift Input Box

   Enter the distance from the center of the receiver to the ground engagement point in the Fore/Aft Shift input box. Measure along the centerline of implement. Enter 0.0 if the implement receiver is centered.

---