Calibrate PWM Limits

PC22410-UN-04APR16

A - Start Button

B - Minus (-) Button

C - Plus (+) Button

D - Set Low Limit Button

E - Set High Limit Button

Turn master switch off or leave Diagnostics at any time to cancel test.

1. Fill applicator with product.

2. Turn on master switch.

3. Select Start button (A).

4. Press and hold + button (C) until minimum acceptable pressure or rotation is achieved. Select Set Low Limit button (D).

5. Press and hold + button until maximum acceptable pressure or rotation is achieved. Select Set High Limit button (E).

6. Repeat procedure for additional products.