Tests

1. 
   PC22295-UN-21MAR16

   John Deere Rate Controller 2000 Button

   Select the John Deere Rate Controller 2000 button.

---




2. 
   PC21158-UN-11MAY15

   Diagnostics Softkey

   Select the Diagnostics softkey.

---




3. 
   PC26819-UN-11FEB19

   A - Tests Tab

   B - Product Drop-Down Menu

   C - Tests Drop-Down Menu

   Select the Tests tab (A).

---




4. Select product from the drop-down menu (B).

5. Select test from the drop-down menu (C).

   Liquid Diagnostic Test Warning displays after selecting any of the following for liquid applications:

   • Configuration Test
   • Nozzle Flow Check
   • Rinse Cycle
   • Control / Section Test
   • Control Valve Test
   • Calibrate PWM Limits
   
   

   NH3 Diagnostic Test Warning displays after selecting any of the following for NH3 applications:

   • Energize System
   • Bleed System Test
   
   

   Dry Diagnostic Test Warning displays after selecting any of the following for dry applications:

   • Granular Flow Check
   • Spreader / Air Cart Check
   • Control / Section Test
   • Calibrate PWM Limits
   • Bin / Tank Cleanout
   
   

6. 
   PC22532-UN-20APR16

   Accept Softkey

   Read the Discharge Warning and select the Accept softkey.

---

Liquid Diagnostic Test Warning

PC13156-19-17FEB11

This message displays when any diagnostic test is selected that discharges liquid.

NH3 Diagnostic Test Warning

PC13151-19-17FEB11

This message displays when any diagnostic test is selected that discharges anhydrous ammonia.

Dry Diagnostic Test Warning

PC13642-19-14JUL11

This message displays when any diagnostic test is selected that discharges dry products.