Adjust Rates

Rates tab allows the operator to change the rate settings after creating a profile with the setup wizard.

1. 
   PC22295-UN-21MAR16

   John Deere Rate Controller 2000 Button

   Select the John Deere Rate Controller 2000 button.

---




2. 
   PC22296-UN-21MAR16

   Setup Softkey

   Select the Setup softkey.

---




3. 
   PC25093-UN-11DEC17

   A - Rates Tab

   B - Rate Selection Drop-Down Menu

   C - Rate 1 Preset Value

   D - Rate 2 Preset Value

   E - Rate 3 Preset Value

   F - Rate Bump

   G - Rate Smoothing Checkbox

   H - Rate Smoothing Percentage

   I - Decimal Shift Drop-Down Menu

   Select the Rates tab (A).

---




4. To choose the rate type displayed on the main run page, select the Rate Selection from the drop-down menu (B).

   • Predefined—Displays the selection buttons for Preset Rate Values. Enter up to three Preset Rate Values (C—E). Rate 1 Preset value is required.
   • Rate Bump—Displays the plus (+) and minus (-) buttons that increment target rate by Rate Bump value. Enter Rate Bump (F).
   • Map Based—Displays the prescription target rate for the current GPS location.

     (Reference Apex™ or John Deere Operations Center for more information about creating prescriptions.)

   
   

5. If desired, select the Rate Smoothing checkbox (G) and enter the Rate Smoothing Percentage (H).

6. If desired, select the Decimal Shift from the drop-down menu (I).