Set Up Dual Control Valve

PC25100
PC25100-UN-07DEC17

A - Application Mode Drop-Down Menu

The return side of the PWM control valve must be wired to the control valve return ground.

Select Dual Control Valve from the Application Mode drop-down menu (A). The control unit changes the product valve driver pairs from increase (+) and decrease (-) to left-hand PWM source and right-hand PWM source. On an NH3 configuration, the second and third product drivers are different from a Generic or Air Cart profile.

(Reference Dual Control Valve in Specifications section.)

HC94949,0000CAE-19-20171212