Dual Control Valve

The configuration of products determines the dual control valve setup. Use the product number in these tables that corresponds with the dual control valve to wire the drivers, inputs, and ground.

(See Driver Table–Multiple Products and Inputs Table-Multiple Products for control valves for all other products.)

Drivers
	Left-Hand PWM Valve Source	Right-Hand PWM Valve Source
Product 1	Driver 15	Driver 16
Product 2	Driver 13	Driver 14
Product 2 (NH3)	Driver 11	Driver 12
Product 3	Driver 11	Driver 12
Product 3 (NH3)	Driver 25	Driver 26
Product 4	Driver 9	Driver 10
Product 5	Driver 5	Driver 6

Inputs
	Left-Hand Rate Sensor Signal	Right-Hand Rate Sensor Signal
Product 1	Input 1	Input 2
Product 2	Input 3	Input 4
Product 2 (NH3)	Input 5	Input 3
Product 3	Input 5	Input 6
Product 3 (NH3)	Input 27	Input 28
Product 4	Input 7	Input 8
Product 5	Input 9	Input 10

Ground
	PWM Valve Return Ground
All Products	High current ground (Pin 4 on 47-pin connector.)