Pressure Sensor Configuration

Pressure sensors 1 and 2 can be configured for NH3 toolbars, sprayers (pull-behind or self-propelled), liquid fertilizer tools, air carts, and generic implements.

Pressure sensor 3 can be configured for air carts, generic implements, and multiple product NH3 toolbar systems.

Pressure sensor 4 can be configured for both air carts and generic implements with more than two products, or with two or fewer products and have less than 12 sections.

Pressure sensor 5 can be configured for both air carts and generic implements:

• Without a system master clutch, have four or fewer products, and have less than eight sections.
• With a system master clutch, have five products, and product 5 application mode:
  • Is not Granular Split Belt Dual Encoder.
  • Does not have a shaft sensor enabled.
  • Does not have a fill meter option enabled.

Pressure sensor 6 can be configured for both air carts and generic implements with less than four sections.