Setup Wizard—Planter

John Deere Rate Controller 2000 planter profile is not compatible with planters that have variable rate drives.

1. 
   PC22295-UN-21MAR16

   John Deere Rate Controller 2000 Button

   Select the John Deere Rate Controller 2000 button.

---




2. 
   PC22296-UN-21MAR16

   Setup Softkey

   Select the Setup softkey.

---




3. 
   PC23139-UN-04OCT16

   A - Implement Tab

   B - Change / New Button

   C - Edit Button

   D - Remove Button

   Select the Implement tab (A).

---




4. Select the Change / New button (B).

   If a profile is already configured, selecting the Edit button (C) starts the setup wizard for the selected profile and all the steps must be completed to close the wizard.

   A maximum of eight profiles can be saved. Selecting the Remove button (D) deletes the selected profile.

5. 
   PC23140-UN-04OCT16

   E - Select Profile Drop-Down Menu

   F - Accept Button

   Select New Profile from the drop-down menu (E).

---




6. Select the Accept button (F).

7. 
   PC24938-UN-03NOV17

   A - Profile Name

   B - Machine Type Drop-Down Menu

   C - Application Width

   D - Units of Measurement Drop-Down Menu

   E - Next Page Button

   Enter the Profile Name (A). This is the name displayed on the run page.

---




8. Select planter from the Machine Type drop-down menu (B).

9. Enter the Application Width (C).

10. Select the units of measurement from the drop-down menu (D).

11. Select the Next Page button (E).

12. 
    PC23141-UN-04OCT16

    A - Number of Sections

    B - Row Spacing

    C - Next Page Button

    Enter the Number of Sections (A).

---




13. Enter the Row Spacing (B).

14. Select the Next Page button (C).

15. 
    PC23142-UN-04OCT16

    A - Section 1

    B - Section 2

    C - Section 3

    D - Section 4

    E - Section 5

    F - Next Page Button

    Total number of rows multiplied by the row spacing cannot exceed the total application width.

    Enter the number of rows for each section (A—E).

---




16. Select the Next Page button (F).

17. 
    PC23143-UN-04OCT16

    A - Previous Page Button

    B - Next Page Button

    Graphic displays each section width and output driver that controls each section. Verify that implement wiring is correct. Application width and section widths may only be edited in the setup wizard. If needed, select the Previous Page button (A) to make corrections.

    Review Setup Sections and select the Next Page button (B).

---




18. 
    PC23144-UN-04OCT16

    A - Accept Button

    Review Setup Summary and select the Accept button (A).

---