Set Up Bin Chaining

Bin chaining is not an option while creating or editing a profile. Bin chaining is only available on bins 1 and 2 under a spreader profile. Each product must share the same section group for bin chaining to be available.

Activating or deactivating bin chaining results in changes to the displays documentation settings. Verify product application type and name for all products within documentation after setting up bin chaining.

1. 
   PC22295-UN-21MAR16

   John Deere Rate Controller 2000 Button

   Select the John Deere Rate Controller 2000 button.

---




2. 
   PC22296-UN-21MAR16

   Setup Softkey

   Select the Setup softkey.

---




3. 
   PC22341-UN-06APR16

   A - Settings Tab

   Select the Settings tab (A).

---




4. Low bin level sensor required for bin chaining to function.

5. 
   PC24631-UN-21AUG17

   A - Low Bin Level Sensor checkbox

   B - Bin Chaining Mode Drop-Down Menu

   C - Bin Chaining Order Drop-Down Menu

   D - Accept Button

   Select the Low Bin Level Sensor checkbox (A). If not selected, the Bin Chaining Mode (B) and Bin Chaining Order (C) drop-down menus do not display.

---




6. Select the Bin Chaining Mode from the drop-down menu.

   • Auto—automatically switches bins.
   • Manual—alerts operator when the low bin level sensor trips.
   • Off—is the default mode. To change the Bin Chaining order, the Bin Chaining Mode must be off.
   
   

7. Select the Bin Chaining Order from the drop-down menu.

8. Select the Accept button (D).