Bleed System Test

PC22536-UN-20APR16

A - Section Toggles

B - Override Height Switch Checkbox

C - Start Button

Turn master switch off or leave diagnostics page to immediately force valves to return to closed position and stop flow.

Bleed Section Test allows operator to bleed trapped anhydrous ammonia from high-pressure lines between section valves and control valve while remaining seated in cab.

1. Disconnect nurse tank and supply lines.

2. Ensure that area is clear of people, pets, and livestock.

3. Position machine into the wind.

4. Enable desired sections (A).

5. Turn master switch on.

6. Select Override Height Switch checkbox (B).

7. Select Start button (C).

8. Toggle sections as needed.