Charge Tank / Bin

Always check for bystanders before starting the spinner. Failure to do so may cause injury to you or others.

If the tank or bin is not enabled, the Tank / Bin Charge button is grayed out.

1. 
   PC22709-UN-01JUN16

   Rate Setup Button

   Select the Rate Setup button.

---




2. 
   PC22710-UN-01JUN16

   A - Product Drop-Down Menu

   B - Tank / Bin Charge Button

   Select a product from the drop-down menu (A). Control valve assigned to the product must control rate.

---




3. Select the Tank / Bin Charge button (B).

4. 
   PC22711-UN-01JUN16

   
   PC22712-UN-01JUN16

   A - Product 1 Tank / Bin Charge Button

   B - Product 2 Tank / Bin Charge Button

   C - Product 3 Tank / Bin Charge Button

   D - Product 4 Tank / Bin Charge Button

   E - Accept Button

   Master switch and any assigned RPM meters must be turned on for Tank / Bin charge to operate.

   To operate the conveyor manually, select and hold the Product Tank / Bin Charge button (A—D).

---




5. Select the Accept button (E) when finished.