520M Non Self-Leveling Loader Specifications on 5E Series FT4 Three-Cylinder Tractors

W24300-UN-04NOV13

Model 5E Series FT4 Three-Cylinder Tractors1
Minimum Rear Ballast	Option 1	3-Point Hitch 1000 kg (2205 lb)
	Option 2	3-Point Hitch 800 kg (1764 lb) Plus Rear Axle 300 kg (661 lb)
Front Tires	12.4 R24
Rear Tires	16.9 R30
Materials Bucket
Width	1850 mm (73 in)
Length	—
Mass	178 kg (392 lb)
Hydraulic System
Rated Flow	60 L/min (16 gal/min)
Maximum Pressure	19 498 kPa (195 bar) (2828 psi)
Cycle Times (in seconds)
Loader Raise Time	5.1
Loader Lower Time	3.4
Bucket Dump Time	4.3
Bucket Rollback Time	2.6
Lift Height (Maximum)
To Pivot Pin (A)	3352 mm (132 in)
Clearance
Bucket Level (B)	3157 mm (124 in)
Bucket Dumped (C)	2520 mm (99 in)
Digging Depth (H)	73 mm (3 in)

Reach
At Maximum Lift Height with Bucket Dumped (D)	1038 mm (41 in)
Bucket on Ground with Bucket Leveled (F)	2248 mm (89 in)
Angles (Maximum)
Dump (E)	55°
Dump at Ground	144°
Rollback (G)	44°
Lift Capacity
To Maximum Height at Pivot Point (U)	1598 kg (3523 lb)
To Maximum Height at 800 mm (31.5 in) Ahead of Pivot Point (V)	1040 kg (2293 lb)
To 1500 mm (59 in) at Pivot Point (W)	1828 kg (4030 lb)
To 1500 mm (59 in) at 800 mm (31.5 in) Ahead of Pivot Point (X)	1349 kg (2974 lb)
Breakout Force
At Pivot Point (Y)	20 644 N (4641 lbf)
800 mm (31.5 in) Ahead of Pivot Point (Z)	14 092 N (3168 lbf)
Bucket Rollback Force
At maximum height (VV)	11 855 N (2665 lbf)
At 1500 mm (59 in) lift height (XX)	21 093 N (4742 lbf)
At Ground Level Line (ZZ)	21 485 N (4830 lbf)