520M Mechanical Self-Leveling Loader Specifications on 5E Series T3 Three-Cylinder Tractors

W24299-UN-04NOV13

Model 5E Series T3 Three-Cylinder Tractors1
Minimum Rear Ballast	Option 1	3-Point Hitch 1450 kg (3197 lb)
	Option 2	3-Point Hitch 1250 kg (2756 lb) Plus Rear Axle 400 kg (882 lb)
Front Tires	12.4 R24
Rear Tires	16.9 R30
Materials Bucket
Width	1850 mm (73 in)
Length	—
Mass	178 kg (392 lb)
Hydraulic System
Rated Flow	43 L/min (11 gal/min)
Maximum Pressure	19 498 kPa (195 bar) (2828 psi)
Cycle Times (in seconds)
Loader Raise Time	4.6
Loader Lower Time	3.1
Bucket Dump Time	3.6
Bucket Rollback Time	3.6
Lift Height (Maximum)
To Pivot Pin (A)	3336 mm (131 in)
Clearance
Bucket Level (B)	3141 mm (124 in)
Bucket Dumped (C)	2483 mm (98 in)
Digging Depth (H)	79 mm (3 in)

Reach
At Maximum Lift Height with Bucket Dumped (D)	922 mm (36 in)
Bucket on Ground with Bucket Leveled (F)	2155 mm (85 in)
Angles (Maximum)
Dump (E)	53°
Dump at Ground	107°
Rollback (G)	44°
Lift Capacity
To Maximum Height at Pivot Point (U)	1224 kg (2698 lb)
To Maximum Height at 800 mm (31.5 in) Ahead of Pivot Point (V)	1413 kg (3115 lb)
To 1500 mm (59 in) at Pivot Point (W)	1629 kg (3591 lb)
To 1500 mm (59 in) at 800 mm (31.5 in) Ahead of Pivot Point (X)	1574 kg (3470 lb)
Breakout Force
At Pivot Point (Y)	20 635 N (4639 lbf)
800 mm (31.5 in) Ahead of Pivot Point (Z)	17 454 N (3924 lbf)
Bucket Rollback Force
At maximum height (VV)	17 415 N (3915 lbf)
At 1500 mm (59 in) lift height (XX)	29 897 N (6721 lbf)
At Ground Level Line (ZZ)	29 928 N (6728 lbf)