540M Non Self-Leveling Loader Specifications on 6135E (FT4) Tractor

W20964-UN-11OCT10

Tractor Model 6135E (FT4)1
Minimum Rear Ballast	Option 1	3-Point Hitch 500 kg (1103 lb) Plus Rear Axle —
	Option 2	Rear Axle Only 750 kg (1654 lb)
Front Tires	14.9R24
Rear Tires	18.4R38
Heavy-Duty Materials Bucket
Width	1850 mm (73 in)
Length	—
Mass	228 kg (502 lb)
Hydraulic System
Rated Flow	75 L/min (20 gal/min)
Maximum Pressure	19 498 kPa (195 bar) (2828 psi)
Cycle Times (in seconds)
Loader Raise Time	3.94
Loader Lower Time	2.96
Bucket Dump Time	3.05
Bucket Rollback Time	2.05
Lift Height (Maximum)
To Pivot Pin (A)	3562 mm (140 in)
Clearance
Bucket Level (B)	3368 mm (133 in)
Bucket Dumped (C)	2521 mm (99 in)
Digging Depth (H)	69 mm (3 in)

Reach
At Maximum Lift Height with Bucket Dumped (D)	1028 mm (40 in)
Bucket on Ground with Bucket Leveled (F)	2428 mm (96 in)
Angles (Maximum)
Dump (E)	75°
Dump at Ground	157°
Rollback (G)	42°
Lift Capacity
To Maximum Height (U) at Pivot Pin	1643 kg (3615 lb)
To Maximum Height (V) at 800 mm (31.5 in) (I) Ahead of Pivot Pin	1139 kg (2506 lb)
To 1500 mm (59 in) (W) at Pivot Pin	2346 kg (5161 lb)
Breakout Force
At Pivot Pin (Y)	3111 kg-force (6844 lbf)
800 mm (31.5 in) (I) Ahead of Pivot Pin (Z)	2243 kg-force (4935 lbf)