Recommended Setup/Assembly Sequence

1. Prepare the tractor.

   1. Refer to Prepare Tractor section.

   2. Locate and prepare the loader mating surfaces.

2. Prepare the loader.

   1. Remove all crates, parts, and bucket from around the loader assembly.

   2. Attach lifting straps to the loader assembly and an overhead hoist. Lower the loader assembly to the ground (horizontal).

   3. Remove and discard the shipping banding, wire, and wood pallet.

   4. Cut paint mask rings off all cylinders.

3. Install the hood guard on the tractor.

4. Install mounting frames, braces, hydraulic control valve, hoses, and parts on the tractor.

5. Install the loader on the tractor.

6. Install the bucket.

7. Perform a final inspection and adjustments.