First 10 Hours (300R and 320R Loaders)

□ Lubricate fittings on each side of the loader. (See procedure in Every 10 Hours in this section.)

□ Tighten the mounting frame hardware on both sides. (See procedure in Every 50 Hours in this section.)

□ Tighten the front weight bracket hardware. (See procedure in Every 50 Hours in this section.)

□ Tighten nuts on pivot pins and front frame on both sides of the loader. (See procedure in Every 50 Hours in this section.)

□ Check the parking latch cap screw adjustment. (See procedure in Every 50 Hours in this section.)