Detach Bucket or Attachment

1. 
   W27066-UN-11SEP15

   A - Quick-Lock Pin (1 each side)

   B - Storage Position (1 each side)

   The detaching procedure is the same for all attachments. Bucket attachment shown.

   Start the engine.

---




2. Release the park brake and place the transmission in NEUTRAL.

3. Retract bucket cylinders and raise the boom 460 mm (18 in) above the ground.

4. Engage the tractor park brake and place the transmission in PARK. Shut off engine and remove ignition key.

5. Remove quick-lock pins (A) from each side of the bucket.

6. Store pins in the storage position (B).

7. 
   W27171-UN-10DEC15

   C - Hook (1 each side)

   D - Holder (1 each side)

   E - Holder Strap (1 each side)

   F - Bucket Pin (1 each side)

   Start the engine.

---




8. Extend bucket cylinders until bucket pins (F) release from holder straps (E) on each side of the bucket.

9. Lower the loader boom, place the transmission in REVERSE, and move away from the bucket. Holders (D) release from hooks (C) on each side of the bucket.