120R Loader Specifications on 1023E and 1026R Tractors—1250 mm Bucket

W27082-UN-14SEP15

1023E and 1026R Series Tractors1
Minimum Rear Ballast	Option 1	273 kg (602 lb) rear hitch ballast Plus fluid filled rear tires
	Option 2	230 kg (507 lb) rear hitch ballast Plus 3 rear wheel weights per wheel
	Option 3	235 kg (518 lb) rear hitch ballast Plus 1 rear wheel weights per wheel Plus fluid filled rear tires
Minimum Front Tire Load Index	—	—
Front Tires	18x8.5-10 4PR
Rear Tires	26x12-12 4PR
Materials Bucket
Width	1250 mm (49 in)
Length	—
Mass	70 kg (154 lb)
Hydraulic System
Rated Flow	26.5 L/min (7.0 gal/min)
Maximum Pressure	14 800 kPa (148 bar) (2146 psi)
Cycle Times (in seconds)
Loader Raise Time	3.3
Loader Lower Time	3.2
Bucket Dump Time	3.1
Bucket Rollback Time	2.2
Lift Height (Maximum)
To Pivot Pin (A)	1828 mm (72 in)
Clearance
Bucket Level (B)	1671 mm (66 in)
Bucket Dumped (C)	1371 mm (54 in)
Digging Depth (H)	82 mm (3 in)

Reach
At Maximum Lift Height with Bucket Dumped (D)	626 mm (25 in)
Bucket on Ground with Bucket Leveled (F)	1186 mm (47 in)
Angles (Maximum)
Dump at Full Height (E)	41°
Dump at Ground	115°
Roll back at Ground (G)	30°
Lift Capacity
To Maximum Height (A) at Pivot Point	342 kg (754 lb)
To Maximum Height (A) at 500 mm (19.7 in) (I) Forward of Pivot Point	236 kg (520 lb)
To 1500 mm (59 in) (J) at Pivot Pin	337 kg (743 lb)
Breakout Force
At Pivot Point (Y)	826 kg-force (1823 lbf)
500 mm (19.7 in) Forward of Pivot Point (Z)	599 kg-force (1320 lbf)