120R Loader Specifications on 1023E and 1026R Tractors—1350 mm Bucket

W27082-UN-14SEP15

1023E and 1026R Series Tractors1
Minimum Rear Ballast	Option 1	273 kg (602 lb) rear hitch ballast Plus fluid filled rear tires
	Option 2	230 kg (507 lb) rear hitch ballast Plus 3 rear wheel weights per wheel
	Option 3	235 kg (518 lb) rear hitch ballast Plus 1 rear wheel weights per wheel Plus fluid filled rear tires
Minimum Front Tire Load Index	—	—
Front Tires	18x8.5-10 4PR
Rear Tires	26x12-12 4PR
Materials Bucket
Width	1350 mm (53 in)
Length	—
Mass	83 kg (183 lb)
Hydraulic System
Rated Flow	26.5 L/min (7.0 gal/min)
Maximum Pressure	14 800 kPa (148 bar) (2146 psi)
Cycle Times (in seconds)
Loader Raise Time	3.8
Loader Lower Time	3.2
Bucket Dump Time	4.2
Bucket Rollback Time	2.6
Lift Height (Maximum)
To Pivot Pin (A)	1828 mm (72 in)
Clearance
Bucket Level (B)	1666 mm (66 in)
Bucket Dumped (C)	1304 mm (51 in)
Digging Depth (H)	86 mm (3 in)

Reach
At Maximum Lift Height with Bucket Dumped (D)	698 mm (28 in)
Bucket on Ground with Bucket Leveled (F)	1288 mm (51 in)
Angles (Maximum)
Dump at Full Height (E)	41°
Dump at Ground	115°
Roll back at Ground (G)	30°
Lift Capacity
To Maximum Height (A) at Pivot Point	320 kg (706 lb)
To Maximum Height (A) at 500 mm (19.7 in) (I) Forward of Pivot Point	235 kg (518 lb)
To 1500 mm (59 in) (J) at Pivot Pin	335 kg (739 lb)
Breakout Force
At Pivot Point (Y)	824 kg-force (1816 lbf)
500 mm (19.7 in) Forward of Pivot Point (Z)	591 kg-force (1302 lbf)