220R Loader Specifications on 2520, 2720, 2032R (MY16 and Earlier) Tractors

W27082-UN-14SEP15

2520, 2720, 2032R (MY16 and Earlier) Tractors1
Minimum Rear Ballast	—	Fluid filled rear tires Plus 2 rear wheel weights per wheel Plus 368 kg (811 lb) rear hitch ballast
Minimum Front Tire Load Index	—	—
Front Tires	23x8.50-14 6PR R4
Rear Tires	14-17.5 6PR R4
Materials Bucket
Width	1450 mm (57 in)
Length	—
Mass	88 kg (194 lb)
Hydraulic System
Rated Flow	18.8 L/min (5.0 gal/min)
Maximum Pressure	16 690 kPa (166 bar) (2421 psi)
Cycle Times (in seconds)
Loader Raise Time	3.5
Loader Lower Time	2.2
Bucket Dump Time	5.3
Bucket Rollback Time	3.2
Lift Height (Maximum)
To Pivot Pin (A)	2039 mm (80 in)
Clearance
Bucket Level (B)	1877 mm (74 in)
Bucket Dumped (C)	—
Digging Depth (H)	268 mm (11 in)

Reach
At Maximum Lift Height with Bucket Dumped (D)	808 mm (32 in)
Bucket on Ground with Bucket Leveled (F)	1413 mm (56 in)
Angles (Maximum)
Dump at Full Height (E)	37°
Dump at Ground	110°
Roll back at Ground (G)	39°
Lift Capacity
To Maximum Height (A) at Pivot Point	483 kg (1065 lb)
To Maximum Height (A) at 500 mm (19.7 in) (I) Forward of Pivot Point	346 kg (761 lb)
To 1500 mm (59 in) (J) at Pivot Pin	546 kg (1201 lb)
Breakout Force
At Pivot Point (Y)	819 kg-force (1802 lbf)
500 mm (19.7 in) Forward of Pivot Point (Z)	585 kg-force (1287 lbf)