Lubricate and Maintain Loader Safely—Australia Only

1. 

   
   E50093-UN-08AUG01

   
   W00278-UN-04DEC91

   
   W27507-UN-15JUN16

   A - Service Lock (1 each side)

   B - Lift Cylinder

   Prevent possible injury from an accidental lowering of the loader. DO NOT perform any service around the front of the tractor with the loader elevated and unsupported. Before lubricating or servicing the loader or tractor, perform the following:

   Engage the park brake or place the transmission in PARK.

---




2. Avoid machine damage. DO NOT lower the loader onto service locks with hydraulic pressure applied or with a load in the bucket.

   Lower the loader to the ground or raise the loader and install service locks (A) on both lift cylinders (B). (See Use Service Locks in Operate Loader section.)

3. Shut off the engine.

4. Slowly relieve the hydraulic pressure. (See Relieve Hydraulic Pressure in Controls section.)