Service Loader and Tractor Safely (Loader Attached)—Australia Only

E50093
E50093-UN-08AUG01

W00278
W00278-UN-04DEC91

W27507
W27507-UN-15JUN16

A - Service Lock (1 each side)

B - Lift Cylinder

Prevent possible injury from accidental lowering of the loader. DO NOT perform service in the front of the tractor with the loader elevated and unsupported.

Avoid machine damage. DO NOT lower the loader onto service locks with hydraulic pressure applied or with a load in the bucket.

Before lubricating or servicing the loader or tractor, perform the following:

  1. Engage the park brake or place the transmission in PARK.

  2. Lower the loader to the ground or raise the loader and install service locks (A) on both lift cylinders (B). (See Use Service Locks in Operate Loader section.)

  3. Shut off the engine.

  4. Slowly relieve the hydraulic pressure. (See Relieve Hydraulic Pressure in Controls section.)

OUO6064,000245C-19-20180829