Inspect Tractor for Loose Hardware
Item Measurement Specification

Ballast Weights Retaining Bolts

Torque 230 N·m (170 lb-ft)

Adjustable Front Axle-to-Knee Bolts (Early Model Tractor)

Torque 480 N·m (350 lb-ft)

Adjustable Front Axle-to-Knee Bolts (Late Model Tractor)

Torque 400 N·m (295 lb-ft)

Adjustable Front Axle Disk-to-Flange Bolts

Torque 175 N·m (130 lb-ft)

MFWD Wheel Rim-to-Disk Bolts

Torque 245 N·m (180 lb-ft)

MFWD Wheel Disk-to-Hub Nuts

Torque 300 N·m (220 lb-ft)

Rear Wheel Rim-to-Disk (Late Model Steel 24" & 28" Wheels)

Torque 245 N·m (180 lb-ft)

Rear Wheel Rim-to-Disk (Late Model Steel 18.4-30 & 15.5-38 Wheels)

Torque 350 N·m (255 lb-ft)

Rear Wheel Rim-to-Disk (Early Model Steel Disk) Bolts

Torque 245 N·m (180 lb-ft)

Rear Wheel Rim-to-Disk (Cast Disk) Bolts

Torque 215 N·m (160 lb-ft)

Rear Wheel Rim-to-Disk (Veggie Disk) Bolts (Early Model Tractor)

Torque 235-250 N·m (175-185 lb-ft)

Rear Steel Wheel Disk-to-Hub M16 Bolts

Torque 175 N·m (130 lb-ft)

Rear Steel Wheel Disk-to-Hub M20 Bolts

Torque 600 N·m (445 lb-ft)

Rear Cast Wheel Disk-to-Hub M16 Bolts

Torque 225 N·m (165 lb-ft)

Rear Wheel Disk-to-Hub (Veggie Disk) Bolts (Early Model Tractor)

Torque 200 ± 40 N·m (148 ± 30 lb-ft)

LV,5010S50,D -19-20NOV03-1/2

Item Measurement Specification

ROPS Mounting Cap Screws

Torque (See Note)

Cab Protection System Mounting Cap Screws

Torque (See Note)

NOTE: Refer to Keep ROPS Installed Properly or Keep Cab Protection System Installed Properly, in service section, for hardware torque specifications.

LV,5010S50,D -19-20NOV03-2/2