Tread Settings-Two-Position Rear Wheels

Wheel tread can be adjusted by exchanging the wheels from side-to-side.

The relationship of the wheels are as shown in the diagram.

IMPORTANT: After setting wheel spacing, tighten rear wheel disk-to-hub bolts to specification. Drive tractor 100 m (109 yd) and tighten again.

Specification

Rear Wheel Disk-to-Hub M20 Bolts -Torque 600 N·m (445 lb-ft)

TWO-POSITION REAR WHEELS
TREAD WIDTH
Centerline-to-Centerline
Tire Size Wheel Position A Wheel Position B
18.4-16.1 1088 (42.8) 1216 (47.9)

 
LV808

OUMX005,0001A40 -19-04SEP04-1/1