Changing Transmission-Hydraulic Oil and Filter

SERVICE INTERVAL - 1200 HOURS

 

1. Lower rockshaft to remove trapped oil.

NOTE: The approximate transmission case oil capacity is:

  • 12/12 PowrReverser™-43.5 L (11.5 gal)

  • 24/24 PowrReverser™-45.4 L (12.0 gal)

2. Remove drain plug(s).

  • Adjustable Front Axle-Remove drain plug (C)
  • MFWD Axle-Remove drain plugs (B and C)

Drain oil into pan and dispose of waste oil properly.

3. Replace filter (A) while changing oil. (See procedure in this section.)

4. Fill system with transmission-hydraulic oil. (See CHECKING TRANSMISSION-HYDRAULIC SYSTEM OIL LEVEL in this section.)

Specification

12/12 PowrReverser™ Transmission -Capacity 43.5 L (11.5 gal)
24/24 PowrReverser™ Transmission -Capacity 45.4 L (12.0 gal)

LV10294
LV9622


A-Filter
B-MFWD Drain Plug
C-Transmission Case Drain Plug

OUMX005,0001A94 -19-10SEP04-1/2

5. Check oil level at sight glass (A) after filling, and again after operating for five minutes.


A-Sight Glass

LV9569

OUMX005,0001A94 -19-10SEP04-2/2