Manually Lowering Hitch

causym CAUTION: Avoid possible injury or death from tractor movement. Perform this procedure from operator station.

If engine or electrical power is not available, hitch can be lowered manually. The manual override screw is located behind the operator seat, under the cover plate.

1. Remove cover plate (not shown).

2. Remove protective cap (A) to access set screw.

3. Turn set screw COUNTERCLOCKWISE to lower hitch.

4. With hitch lowered, turn set screw CLOCKWISE and install cap.

5. See your John Deere dealer for repairs.

LV09172


A-Protective Cap

OUO1023,0002804 -19-14MAR06-1/1