Connecting and Operating Single-Acting Cylinder

Single-acting cylinder should only be connected to extend coupler (A).

IMPORTANT: Volume of oil required to extend cylinder will lower transmission-hydraulic oil level. With cylinder fully extended, check oil level and fill to proper level (visible at the bottom of the top sight glass). (See Checking Transmission-Hydraulic Oil Level in your Maintenance Guide.)

Pull SCV control lever back to pressurize and extend single acting cylinder.

Push SCV control lever full forward to "float" position to retract cylinder.

A-Extend Coupler

OUO1023,0002806 -19-14MAR06-1/1