Using Engine Coolant Heater
Immerse element in coolant before connecting heater to power source. NEVER energize heater in air. Located on side of the engine, the 110-volt coolant heater (A) warms the engine coolant, reduces oil drag, eases starting, and shortens warm-up time. Connect heater plug to a ground fault protected 110-volt electrical outlet.
|
|
CAUTION:
To avoid shock or hazardous operation, always use a three-wire heavy-duty electrical cord (minimum gauge 10 AWG and no longer than 7.6 m [25 ft]) equipped with three connectors. If a two-to-three contact adapter is used at the wall receptacle, connect green wire to a good ground.
OUO1023,00028B0 -19-13APR06-1/1 |