Stopping the Engine

IMPORTANT: Certain engine parts are cooled by engine oil. Stopping a hot engine could cause damage by overheating or lack of lubrication.

2. Put gear shift lever in PARK, and allow engine to idle for 2-5 minutes.

3. PowrReverser™ Transmission: Put EH directional reverser lever in NEUTRAL.

4. Lower all equipment to the ground, put all SCV levers in NEUTRAL, and disengage PTO.

5. Turn key (B) to STOP and remove from switch.

A-Hand Throttle
B-Key

OUO1023,00028B3 -19-13APR06-1/1