Using Mechanical Front Wheel Drive-Electro-Hydraulic Control with Auto Engage and Brake Assist-If Equipped
CAUTION:
Mechanical front wheel drive greatly increases traction, it does not increase the stability of the tractor. With MFWD engaged, the tractor can climb steeper slopes but it does not become more stable. The possibility of a tip-over increases with MFWD. Use extra caution on slopes.
When driving on icy, wet, or graveled surfaces, reduce speed and properly ballast tractor to avoid skidding and loss of steering control. For best control under adverse conditions, engage mechanical front wheel drive (if equipped).
IMPORTANT:
Use AUTO or BRAKE ASSIST positions when transporting tractor, not full time ON mode.
NOTE:
MFWD indicator (B) lights whenever front wheel drive is engaged.
MFWD can be engaged and disengaged in all gears (forward and reverse) during operation and under full load. Switch (A) has three operating positions:
-
Center
ON
position engages MFWD full time.
-
Top
AUTO
position disengages MFWD automatically when either brake pedal is pressed or if speed exceeds 14 km/h (8.6 mph). MFWD automatically
re-engages
when brakes are released and speed is below 14 km/h (8.6 mph).
-
Bottom
BRAKE ASSIST
position engages MFWD when BOTH brake pedals are depressed.
|
MFWD Switch with Auto Engage and Brake Assist
MFWD Indicator
A-MFWD Switch with Auto Engage and Brake Assist
B-MFWD Indicator
|