Connecting Cylinder Hoses-Rear SCV

1. Identify extend and retract hoses. Extend hoses should be connected to top couplers (A); retract hoses to bottom couplers (B).

2. Remove dust caps (if equipped) from hose end.

3. Open coupler covers (C).

causym CAUTION: Hydraulic hoses can fail due to physical damage, kinks, age and exposure. Check hoses regularly. Replace damaged hoses.

4. Making sure hose end and coupler are clean, push hose tip firmly into coupler. Pull on hose to make sure positive connection was made.


A-Top (Extend) Couplers
B-Bottom (Retract) Couplers
C-Coupler Covers

LV12588

Two Section

LV12589

Three-Section

LV12590

OUO1032,00016C1 -19-13APR05-1/1