OMRE260580: 5225, 5325, 5425, 5525 and 5625 Tractors, Block File: OUMX005_00018C8_19

Wheel tread can be adjusted by exchanging the wheels from side-to-side and by using spacers.

The relationship of the wheels is shown in the diagrams.

IMPORTANT: After setting wheel spacing, tighten rear wheel disk-to-hub bolts to specification. Drive tractor 100 m (109 yd) and tighten again.

Specification

Rear Steel Wheel Disk-to-Hub M20 Bolts -Torque

600 N·m

(445 lb-ft)

TWO-POSITION REAR WHEELS-TREAD WIDTH (Centerline-to-Centerline)
	No Spacer		30 mm Spacer		44 mm Spacer		111 mm Spacer
Tire	A	B	C	D	C	D	C	D
21.5L-16.1 6PR R3	INT^a	1658 mm (65.3 in.)	INT^a	1718 mm (67.6 in.)	INT^a	1746 mm (68.7 in.)	1495 mm (58.9 in.)	1880 mm (74.0 in.)
22.5LL-16.1 6PR Turf Special	INT^a	1658 mm (65.3 in.)	INT^a	1718 mm (67.6 in.)	INT^a	1746 mm (68.7 in.)	1495 mm (58.9 in.)	1880 mm (74.0 in.)
^aInterference (Do not use)

OUMX005,00018C8 -19-14JUL04-1/1