Locating Fuses-Cab
NOTE:
A fuse and relay reference label is provided inside cover.
1.
Remove portable "Field Office," if equipped.
2.
Remove cover (A) to access main fuse and relay load center and fuse/relay block (B).
3.
If equipped with PowrReverser™ transmission, remove cover (C) to access fuses (D).
All electrical circuits are protected by fuses. Amperage rating is marked on each fuse, plus fuses are color coded to ensure proper replacement.
| Fuse Rating |
Color |
| 5 Amp |
Orange |
| 10 Amp |
Red |
| 15 Amp |
Blue |
| 20 Amp |
Yellow |
| 30 Amp |
Green |
IMPORTANT:
DO NOT replace original fuse with higher rated fuse or machine damage may occur. If original size fuse will not carry electrical load and continues to blow, have the electrical system checked by your John Deere dealer.
A-Cover
B-A/C and Wiper Fuse/Relay Block
C-Cover Under Dash Panel
D-Fuses for PowrReverser™ Transmission-If Equipped
|