Change Engine Oil and Filter
NOTE:
Change oil and filter a minimum of once a year.
1.
Run engine to heat oil.
NOTE:
The approximate engine crankcase oil capacity is 8.5 L (9 qt).
2.
Remove oil drain plug (A) and drain oil.
3.
Replace engine oil filter (B) while changing oil. Apply a film of oil on the new oil filter gasket and install new filter. Hand tighten plus 1/2 turn.
4.
Install drain plug.
IMPORTANT:
Change engine oil every 125 hours if diesel fuel has a sulfur content greater than 0.7 percent.
5.
Add seasonal viscosity grade oil. (See Fuels, Lubricants and Coolant section.)
Specification
Engine Crankcase Oil
-Capacity
|
8.5 L (9 qt)
|
NOTE:
Engine oil should be changed annually as a minimum.
|