Stop the Tractor

causym CAUTION: Always place the gear shift lever in PARK before dismounting. Leaving transmission in gear with engine OFF MAY NOT prevent tractor from moving.

IMPORTANT: Tractor must be stopped before placing gear shift lever in PARK. Park pawl will not engage, and the transmission may be damaged if tractor is moving.

1. Stop the tractor and place gear shift lever (A) in PARK position.

2. Lower all equipment to ground using position control lever (C and D).

3. Pull hand throttle (B) down to slow idle position. Allow engine to idle for one to two minutes.

IMPORTANT: Cooling of certain engine parts is provided by engine oil. Stopping a hot engine suddenly could cause damage to these parts by overheating or lack of lubrication.

causym CAUTION: Remove the key from key switch to prevent operation by untrained personnel.

4. Turn key switch to OFF position.


A-Gear Shift Lever
B-Hand Throttle
C-Draft Control Lever
D-Position Control Lever

PY8033
PY1469

For 5045E, 5055E, 5065E and 5075E Tractors

PY7339

For 5045D and 5055D Tractors

AH98466,0000986 -19-24SEP08-1/1