Set Control Lever Stop

NOTE: Position control lever stop is used when operating depth or height needs to be repeated.

1. Operate implement for a few minutes to determine proper depth or height.

2. Loosen lever stop (A), and slide against position control lever. Lock stop in position by turning in a clockwise direction. Rockshaft will now lower to same position each time control lever is pushed forward to the stop.


A-Lever Stop

PY4548

For 5045E, 5055E, 5065E and 5075E Tractors

PY7445

For 5045D and 5055D Tractors

SA61034,0000205 -19-25SEP08-1/1