Use Draft Control

The rockshaft is equipped with variable draft control system.

Use draft load sensing when:

• Operating with a fully mounted implement in hill and swale terrain. The implement will raise and lower to follow the ground contours while maintaining a nearly constant depth.
• Operating in varying soil conditions. The implement is raised slightly to get through tough spots so you do not have to shift to a lower gear.

Draft control lever (B) controls amount of load required before hitch responds. With lever placed fully forward to the position marked "OFF" (C), there is no draft sensing. Placing the lever toward the rear position reduces the amount of draft load required to override the position setting set by the position control lever (A) and raise the rockshaft.

Draft sensitivity ranges can be changed by repositioning the center link. (See Position Center Link in this section for additional information.)

For draft load sensing operation:

• Initially place position control lever (A) in its fully rearward position and the draft control lever (B) in the fully forward (least draft) position.
• With tractor moving, push position control lever (A) forward to set implement operating depth. Set position control lever stop (D) so control lever can be brought back to the same position. The operating depth set-up will prevent the rockshaft from lowering all the way when the tractor begins to slip. Then pull draft sensing lever (B) rearward until desired draft sensing sensitivity is obtained.
• The position control lever (A) can also be raised slightly to override the draft control setting to help get through slippery spots without getting stuck.

  
  A-Position Control Lever
  B-Draft Control Lever
  C-Draft Sensing Off Position
  D-Position Control Lever Stop

For 5045E, 5055E, 5065E and 5075E Tractors




For 5045D and 5055D Tractors

SA61034,0000207 -19-25SEP08-1/2

• The position control lever (A) can be moved fully rearward to raise the hitch at the end of the field.

SA61034,0000207 -19-25SEP08-2/2