Adjust Toe-In (Two-Wheel Drive Tractor)

1. Loosen lock nuts (A) and back out the bolts (B) on tie rod tubes several turns.

2. Adjust tie rods on both sides of the tractor equally by rotating the inner tube (C) to lengthen or shorten tie rod. Adjust toe-in to 8 to 16 mm (5/16 to 5/8 in.)

Tie Rod Rotation Approximate Change in Toe-in
1/2 turn 8 mm (5/16 in.)
1 turn 16 mm (5/8 in.)

 

3. Tighten bolts (B) to specification. Do not overtighten as damage to the tube may occur.

Specification

Tie Rod Bolts -Torque 85 N·m (62 lb-ft)

4. Tighten the lock nuts (A) to specification.

Specification

Tie Rod Lock Nuts -Torque 90 N·m (66 lb-ft)

PY6287


A-Lock Nuts
B-Tie Rod Bolts
C-Inner Tube

SA61034,0000246 -19-29FEB08-1/1