Tread Settings-Two-Position Rear Wheels

Wheel tread can be adjusted by exchanging the wheels from side-to-side and by using spacers.

The relationship of the wheels is shown in the diagrams.

IMPORTANT: After setting wheel spacing, tighten rear wheel disk-to-hub bolts to specification. Drive tractor 100 m (109 yd) and tighten again.

Rear Wheel -Specification - Specification

Rear Wheel Rim-to-Disk Nuts -Torque 245 N.m (180 lb.ft)
Rear Wheel Disk-to- Flange Bolts -Torque 550 N.m (406 lb.ft)

M47178

TWO-POSITION REAR WHEELS-TREAD WIDTH (Centerline-to-Centerline)
  No Spacer 30 mm Spacer 44 mm Spacer 111 mm Spacer
Tire A B C D C D C D
21.5L-16.1 6PR R3 INT&crossa; 1658 mm (65.3 in.) INT&crossa; 1718 mm (67.6 in.) INT&crossa; 1746 mm (68.7 in.) 1495 mm (58.9 in.) 1880 mm (74.0 in.)
&crossa;Interference (Do not use)

 

SA61034,000029E -19-06MAR08-1/1