Service Interval Chart—500 Hours / 1000 Hours / Annually / 2000 Hours or Two Years / 5000 Hours or Five Years

Item

500 Hours

1000 Hours

Annually

2000 Hours / Two Years

5000 Hours / Five Years

Change engine oil and filter * 1

       

Replace fuel filters

       

Replace transmission-hydraulic oil filter

       

Lubricate front wheel bearings (2WD axle)

       

Tighten all hose clamps

       

Check cooling system for leaks

       

Lubricate rear axle bearings

       

Check engine idle speed

       

Inspect air intake hose, turbo air cooler pipes and hose clamps

       

Clean cab air filters

       

Change transmission-hydraulic oil and filter

 

     

Change MFWD axle and wheel hub oil

 

     

Clean engine crankcase vent tube

 

     

Change engine oil and filter

   

   

Replace engine air intake filters

   

   

Inspect seat belt

   

   

Drain, flush and refill engine cooling system2

     

 

Adjust engine valve clearance3

     

 

Drain, flush and refill engine cooling system4

       

Test or replace thermostat

       

Replace crankshaft vibration damper3

       

1 When using any lubricant other than John Deere TorqGARD or PLUS 50 oil and filter, lower this service interval to 250 hours
2 Can be extended to 5000 hours or 5 years if John Deere COOL-GARD is used.
3 See your John Deere dealer for service.
4 If John Deere COOL-GARD is used.

NS43404,00004D8-19-20080324