|
REAR AXLE FINAL DRIVES:
|
Inboard planetary three pinion
|
| |
|
|
|
|
|
|
| |
•
|
|
REAR WHEEL EQUIPMENT:
|
See section 81 in the Operator's Manual
|
| |
•
|
|
FRONT AXLES:
|
|
|
|
|
|
|
|
2WD – tread range 1524 to 2235 mm (60 to 88 in.)
|
Optional
|
N/A1
|
N/A1
|
N/A 1
|
N/A 1
|
N/A 1
|
|
1300 Series MFWD - tread range 1524 to 2235 mm (60 to 88 in.
) 5 step drop only
|
Standard
|
N/A 1
|
N/A 1
|
N/A 1
|
|
1500 Series MFWD - tread range 1524 to 3657 mm (60 to 144 in.
) 4 or 5 step drop
|
Optional (Front Dual Tire Compatibility)
|
Optional (Front Dual Tire Compatibility)
|
|
ILS - tread range 1524 to 3657 mm (60 to 144 in.) 4 or 5 step
drop
|
Optional (Front Dual Tire Compatibility)
|
Standard (Front Dual Tire Compatibility)
|
| |
•
|
|
STEERING :
|
|
|
Hydraulic power-steering w/electric pump back-up
|
Standard: 406 mm (Tilt-telescope W/Memory) Steering Wheel
|
|
1300 MFWD
|
Steering Wheel Ratios, Turns Lock to Lock, 14.2:1 /3.4
|
Optional
|
|
1500 MFWD
|
Steering Wheel Ratios, Turns Lock to Lock, 20:1 /4.4
|
Optional
|
|
ILS
|
Steering Wheel Ratios, Turns Lock to Lock, 17.8:1 /4.1
|
Optional
|
|
Active Command Steering (ACS™) w/electric pump back-up
|
Optional: 345mm Steering Wheel, Variable ratio 15:1 to 23:1
(3.1-5.0 turns lock to lock) w/Dynamic Road Wheel Offset Control and
passive tactile feedback
|
|
HYDRAULIC SYSTEM: (type)
|
Closed-center, pressure/flow compensated
|
|
Selective control valves
|
|
|
Main pump, axial piston (displacement)
|
63cc standard, 85cc optional
|
85cc Standard
|
|
Maximum pressure
|
20,400 +or- 300 kPa (2,958.1 psi +or- 4.4 psi)
|
|
|
Rated flow, 63cc pump
|
44 US gpm/166.6 lpm
|
N/A 1
|
|
Rated flow, 85cc pump
|
60 U.S. gpm/227.1 lpm
|
|
Available flow at a single SCV
|
35 U.S. gpm/132 lpm
|
|
Take out oil capacity
|
Standard: Hydraulic Oil Take-out capacity is 25 liters @ 2 lps.
Field Installed Option: Take out capacity is 50 liters @ 2 lps and
requires auxiliary tank
|
|
•
|
|
3-POINT HITCH: (Rear)
|
|
|
Category 3/3N with Quik-Coupler Standard
|
Standard: 6259 kg (13,800 Lbs.)
|
N/A 1
|
|
Category 3/3N with Quik-Coupler Optional- 120 mm Axle Required
|
Optional: 7847 kg (17,300 Lbs.)
|
N/A 1
|
|
Category 4N/3 with Quik-Coupler Optional - 120 mm Axle Required
|
Optional: 8300 kg (18,300 Lbs.)
|
Standard: 8300 kg (18,300 Lbs.)
|
|
3-POINT HITCH (Front) - Requires
ILS – Category 3N
|
Optional: Cat. 3N Ground Engaging Hitch, 5,200 kg (11,464 lb.)2 Lift Capacity
|
| |
•
|
|
DRAWBAR
|
|
Cat 3 1837 kg (4050 lb.) Vertical Load dependent on drawbar
position
|
Standard
|
N/A 1
|
|
Cat 4 2245 kg (4950 lb.) Vertical Load Capability
|
Optional
|
Standard
|
|
Cat 4 With Heavy Duty Support 4990 kg (11,000 lb.) Vertical
Load Capability
|
Optional
|
| |
Standard
|
Optional
|