Requirements for PTO

Before transferring control to implement, prepare implement as indicated in implement Operator's Manual. Transfer control using AutoTrac™ resume switch or TIA resume softkey as presented in implement Operator's Manual.

The following guidelines must be met before transferring implement control.

• Operator on seat.
• No PTO system malfunctions.
• PTO remote control off.
• PTO engaged (PTO switch On).

While operating, implement has ability to engage/disengage PTO.

To withdraw control, turn PTO switch off.

NOTE: Unless implement is authorized to engage PTO when tractor is stationary, tractor will prevent engagement of PTO when stationary. Implement is however, allowed to disengage PTO.