Requirements For Rear Hitch

Before transferring control to implement, prepare implement as indicated in implement Operator's Manual. Transfer control using AutoTrac™ resume switch or TIA resume softkey as presented in implement Operator's Manual.

Implement can automatically control hitch depth.

The following guidelines must be met before transferring implement control.

NOTE: Operator sets raise limit using tractor CommandCenter™. This limit cannot be exceeded by implement.

The following guidelines must be met:

• Operator sitting in seat.
• Hitch must be functional.
• Hitch control lever in neutral position.
• Hitch is not locked.

While operating, implement has ability to control hitch depth.

To withdraw control:

• Actuate hitch control lever.
• Lock hitch (transport lock.)
• Actuate fender switch (if equipped).

NOTE: Unless implement is authorized to adjust hitch depth when tractor is stationary, tractor will prevent hitch depth adjustments when stationary.