500 Hour Service Records

• Changing engine oil and filter NOTE: The initial break-in service interval of a new or rebuilt wet sleeve engine with Break-In Plus must go at least 100 hours to assure the surface mating of the rings and liners has had an opportunity to occur. The 100 hour minimum applies to all new or rebuilt engines. The maximum service interval is the same as the service interval recommendations listed in Engine Oil and Filter Service Intervals—Interim Tier 4 and Stage III B Engines located in section 90 of this Operator's Manual.

  For subsequent oil changes, see Engine Oil and Filter Service Intervals—Interim Tier 4 and Stage III B Engines located in section 90 of this Operator's Manual.

  
  
• Checking wheel and wheel weight bolts
• Checking dual beam radar sensor
• Replacing BOTH fuel filters¹
• Checking air intake system
• Cleaning optional fuel water separator filter element (If Equipped)

Hours					Hours
Date					Date
Hours					Hours
Date					Date