Setting up Hands Free (Bluetooth®) Mode – Premium Radio

RXA0102670-UN-06MAY09

Setting Up BLUETOOTH Mode

A - iTitle Menu Button

B - Up Button

C - Down Button

D - OK Button

E - Audio Knob

F - Display

G - ESC Button

NOTE: Ensure device being paired is BLUETOOTH capable and has been enabled.

1. Press and hold I Title Menu button (A) until audible beep.

2. Rotate AUDIO knob (E) or press up/down buttons (B and C).

3. When HANDS FREE appears on display (F), press OK button (D).

4. Rotate AUDIO knob (E) or press up/down buttons (B and C) and select ON.

5. Press OK button.

   NOTE: BLUETOOTH Status (icon) should appear on radio display.

Add Phone:

1. Rotate AUDIO knob (E) or press up/down buttons (B and C).

2. Watch display and select ADD PHONE by pressing OK button.

   NOTE: When ADDING PHONE appears on display, radio is scanning for BLUETOOTH devices. Ensure paired BLUETOOTH device has been set to add a device and is searching for DEA355 Radio.

   After 3 minutes, if no phone is added, radio displays NO PHONE FOUND.

3. ADDING PHONE will appear on radio display for 3 seconds and BLUETOOTH (icon) will blink up to 3 minutes.

4. Use PIN number 0000 to connect to radio.

   NOTE: When mobile phone is successfully added to radio, PHONE CONNECTED will appear on display first line. Radio display second line will show BLUETOOTH phone name for 3 seconds.

Edit Phone:

1. Rotate AUDIO knob (E) or press up/down buttons (B and C) and when EDIT PHONE appears on display, press OK button.

2. The radio will display a list of mobile phones added.

   NOTE: If 16 have been stored, the ADD PHONE option is disabled until a phone is deleted.

3. To delete a mobile phone, rotate AUDIO knob (E) or press up/down buttons (B and C) to select desired mobile phone, then press OK button.

4. Phone is deleted, and radio display returns to previous menu display.

Answer Phone:

1. To accept incoming call, press OK button.

2. To reject incoming call, press ESC button (G).

HANDSFREE (Bluetooth)

When a mobile phone has been previously paired with the radio and an incoming call is received, the radio will pause/mute and show on the display the phone name on the first line and the phone number on the second line. The << characters indicate incoming call. When a call is placed on the mobile phone, the radio will pause /mute and show on the display the phone name on the first line and the phone number on the second line. The >> characters indicate outgoing call.

Call Transfer:

If a call is in progress press the 2/PAUSE/PLAY button to allow the system to transfer the call to the mobile phone. The radio will display CALL TRANSFERRED.

Phone Disconnection:

If the mobile phone ends the Bluetooth connection with the radio, is turned off or when the phone signal gets out of range, the radio will display PHONE DISCONNECTED.

Phone Reconnection:

If the mobile phone previously connected re-activates the connection with the radio, the mobile phone is turned on or the phone signal gets in range, the radio will display PHONE CONNECTED.